NA4500

Built-in DSP process. 48k 24bit sampling.
Support noise gate, PEQ, delay, 4×4 matrix
mixing, compressor, limiter adjusting.
Support HPF, LPF, Butterworth, Bessel,
Linkwitz-Riley, LSLV, HSLV, ALL-PASS filters.
Built-in FIR filter and linear phase setting,
4×256/512/768/1024taps for setting. Support
constant voltage and constant resistance: 100V,
70V, 8ohms, 4ohms. Support distributed speaker
systems. Support stereo, bridge, parallel, matrix
mode. 320×240 pixel colorful IPS display.
Control connections: USB or TCP/IP. Configured with RS232 and RS485 central control connection. Configured with GPIO external expansion control connection. Dual-network port design, supporting TCP/IP network hand in hand control. Nice GUI windows7/8/10/11 software for network control. NA 4500 D Models Dante versions.

SKU: na4500
FeatureSpecification
Channels4
Power 4×300W@8Ω 4×500W@4Ω
Bridge mode 2×1000W@8Ω
Cooling system Dual fans intelligent control
Device monitor Temperature, Power, Voltage, Current
Support functions 100V, 70V, 8Ω, 4Ω
DSP process 300MHz, 48KHz 24bit
Input connections Balanced analog 4×XLR(Neutrik®), DANTE
Audio Source Topology Phoenix terminal Line-out
Dante in option Dante network 4 channels
Gain 6dB sensitivity: 30dB (×29.5); 0dB sensitivity: 36dB (×31.1)
Max input level 6dB sensitivity: 14dBu (3.88V); 0dB sensitivity: 8dBu (1.94V)
Output Interface Binding post×4 or Spoken*4 (Two version)
Frequency Response 20Hz 20kHz (±0.5dB)@1W, 8Ω
Ground Noise 700uVRMS (-60dBu)
THD+N <1%@1W, 8Ω
SNR 6dB sensitivity: 97dB; 0dB sensitivity: 97dB
Channel Isolation <-70dB
USB: Type A-B, free driver
RS232/485/GPIO: Serial port communication
TCP/IP interface: Dual-port RJ-45, support 5 devices hand in hand
Indicator light: Switch on/off
Display 320×240 pixel colorful IPS display
Supply AC180~264 50/60 Hz
Products Dimensions 483mm*305mm*44.5mm, 1U
Packaged Dimensions 542mm*453mm*77mm
Net Weight 4.65kg
Packaged Weight5.2kg

RELATED PRODUCTS